Posts made by PAUL TWYMAN

• KP35 Idle speed and bearing pre-load

  @YUAN CAO THAT`S WHAT I DO USE A DAB OF LOCTITE DO NOT USE SUPERGLUE AS HEAT DESTROYS THE ADHESIVE OF THE SUPERGLUE.HAVE YOU CHECKED FOR LEAKAGES FROM THE CASING,IF YOUR STARTING MOTOR IS QUIET YOU...

  posted in KP35

  PT

  PAUL TWYMAN
  10/9/23, 9:35 PM
• KP35 Idle speed and bearing pre-load

  use both wavy spring washers one on each bearing. if the wavy spring is slack you will have to use shims on kj66 the preload is 16lb but it runs much better on 8 but then on a kj66 preload is a 1" ...

  posted in KP35

  PT

  PAUL TWYMAN
  10/5/23, 8:16 PM